Congratulations!

About your Geberit AquaClean Mera Classic

This is where you will find practical information on commissioning and functionality to get you off to the easiest possible start with your shower toilet. We show you how to switch on the device, connect the remote control and set the main functions. You will also find out about the different operating options.

How to switch on your Geberit AquaClean

Lift up the cover and switch the button to on. After switching on your device, the status LED flashes blue during initialisation. Wait until the status LED stops flashing. This procedure takes approximately 2 minutes. Once this is complete, your shower toilet will be ready for use for the first time.

Set up the shower toilet Here’s how it’s done

Connect the remote control

It only takes 30 seconds to connect the remote control to the device. The video will show you which buttons you need to press at the same time.

Set the main functions

How do I activate the odour extraction? How do I adjust the position and intensity of the shower spray? The video will show you everything you need to know about the main functions and how to use them.

Create a personal profile

Using the back of your remote control or the Geberit Home App, you can conveniently create a personal user profile that you can launch at any time. You can create up to 4 user profiles in total. The video will show you how to create the profiles.

Your flexible control options

With the Geberit AquaClean Mera Classic, the choice is yours. This is where you will find an overview of the available control options.

Your options

Wall-mounted control panel

The wall-mounted control panel is a stylish alternative to the remote control. It is firmly bonded or screwed to the wall and is connected to your shower toilet via Bluetooth.

Large button:
Start and stop spray functionality

+/- button:
Increase and reduce shower spray and dryer air intensity

</> button:
Set spray arm position

Below is where you will find the buttons for activating and stopping the lady shower, dryer and odour extraction.

Remote control

The front side of the remote control is for performing all day-to-day functions.

Large button:
Start and stop the spray functionality

+/- button:
Reduce and increase shower spray and dryer air intensity

</> button:
Set spray arm position

Below is where you will find the buttons for activating and stopping the lady shower, dryer and odour extraction.

Use the four small buttons at the bottom of the remote control to launch your user profiles.

Lateral control panel

The lateral control panel on the shower toilet can be used to execute the following functions:

Large button:
Start and stop spray functionality

Upper button:
Increase spray intensity

Lower button:
Reduce spray intensity

The lateral control panel features a status LED that provides information on the current device status.

Wall-mounted control panel

The wall-mounted control panel is a stylish alternative to the remote control. It is firmly bonded or screwed to the wall and is connected to your shower toilet via Bluetooth.

Large button:
Start and stop spray functionality

+/- button:
Increase and reduce shower spray and dryer air intensity

</> button:
Set spray arm position

Below is where you will find the buttons for activating and stopping the lady shower, dryer and odour extraction.

Remote control

The front side of the remote control is for performing all day-to-day functions.

Large button:
Start and stop the spray functionality

+/- button:
Reduce and increase shower spray and dryer air intensity

</> button:
Set spray arm position

Below is where you will find the buttons for activating and stopping the lady shower, dryer and odour extraction.

Use the four small buttons at the bottom of the remote control to launch your user profiles.

Wall-mounted control panel

The wall-mounted control panel is a stylish alternative to the remote control. It is firmly bonded or screwed to the wall and is connected to your shower toilet via Bluetooth.

Large button:
Start and stop spray functionality

+/- button:
Increase and reduce shower spray and dryer air intensity

</> button:
Set spray arm position

Below is where you will find the buttons for activating and stopping the lady shower, dryer and odour extraction.